• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. In this case, it is essential that the new handles match the critical dimensions of the previous handle.

The three measurements to be inspected are the top screw's location as well as the key hole and lever sizes. Refer to the size guide for help with this.

Inline Lever/Lever

A lever or lever door handle is a modern handle that can be put in on doors that are new or replacement window handle. This kind of handle is available in many styles and finishes. A number of manufacturers make this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed from robust materials, and are perfect for multi-point lock doors that require a robust design. The handles are inline, and they use the same spindle and screws to secure them. They can be easily mounted on any uPVC/Composite door.

The sprung lever design allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been endurance-tested to 200 000 cycles. This helps to ensure that the quality of finish and performance over time. The sprung lever is also adjustable to accommodate a wide range of locks. This is particularly beneficial for narrower door frames where the cylinder is located further back. A lever that is shorter can be used for doors with a latch that can be activated with the thumb located on the inside.

Lever Pad

The lever pad upvc handle is distinct from the lever handles that are found on most doors. These handles can operate from a single spindle (inline) or independently from both sides using two offset spindles or inline (pad). They are generally employed on UPVC double glazed doors. They come in many variations & finishes.

The handles have been tested to a minimum of 200k cycles and are available in several finishes, including White, Silver, Chrome & Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad styles for handles are supplied with a spindle and screws which allow them to be fitted on an existing or new uPVC door. The 211mm backplate fixation centres allow for a wider handle, which is typically an advantage when replacing an old aluminium window handles or damaged multi-point door lock mechanism. The handle levers are sprung, solving the problem of handles hanging from their horizontal position when they are not being used.

It is essential to match the dimensions of the PZ for both the multipoint lock as well as the uPVC doors when selecting the replacement handles for windows UPVC spindle and handle. This measurement may also be referred to as 'handle centres or cylinder centre'. It is important to match the correct handles.

Once you have decided on the correct PZ size and the correct PZ size, you must make sure that the push and lever pads are shaped to match the American with Disabilities Act compliant handles you require for your sliding patio door handle replacement. They typically have rectangular or round in shape with an internal lever and an external door handles push pad.

Most of the UPVC lever pads we offer are sprung, which means that they will return to their horizontal position when they are not in use, instead of hanging out and possibly sticking in the frame. This stops draughts and cold air from getting into a house. You will also find that the majority of UPVC lever pad handles are handed that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. They work by using a key to unlock a cylinder case that then reveals pins which can be aligned with the pins in the lock body, allow them to rotate an revolving cam, opening the door. Euro Cylinders can be fitted with up to six pins, with external and internal doors usually needing different levels of security.

The choice of cylinder you choose is crucial. It's dependent on the amount of use your doors and handles will receive. For instance, doors that are external must be secured with a higher security cylinder, while doors inside can be secured with the standard cylinder. Additionally, certain cylinders have extra features that increase security further, such as anti-drill or anti-bump properties.

A euro cylinder should be measured correctly to ensure it's the correct size for your door. The cylinder should be measured from the hole for fixing screws in the middle to the end of the cylinder, including the thumb turn if you have one. If you cannot measure using the lock in a fixed position, you can remove it. It is crucial to ensure that there is no extension of the cylinder beyond the handle or escutcheon. This can make it vulnerable to snapping lock attacks.

The design of most newer cylinders includes anti-drilling and bump resistance features. These are designed to reduce the chance of a attack by forcing the cylinder rotate in a different direction. This helps stop the attack and ensure your doors are secure.

There are cylinders designed to withstand snapping. This is a common attack on cylinders. A specially designed tool is used to break the lock's break line and then the front of cylinder is snapped off. This is faster and easier to achieve than opening the door with multipoint locks. It also leaves little evidence of a break-in which could hinder an insurance claim.

Spring Cassette

This spring cassette sits within the base of the door handle backplate providing a sprung solution to return the multipoint lock handles back to their normal position after use. The handles had no spring and would drop when the locking mechanism was disengaged. This simple feature is one of the most effective ways to fix this, and is a great way to prevent your upvc doors from getting stuck in the open or closed position, since they aren't always simple to close manually.

These spring cassettes are specially made for use with multipoint locks that are sprung but they won't work with unsprung multipoint handles and you will require a bespoke hole cut into your backplate in order for them to fit (please look at the image for a technical diagram). These cassettes can be used as a replacement to damaged or missing cassettes in the backplate of uPVC door handles. They are sold as one unit. They come with a square cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a fantastic value-for-money solution to the issue of handles on your doors that are sagging. They are simple to install and will extend the lifespan of your uPVC door. Contact us for more information on our range of uPVC accessories and spares. We are available to assist you and offer expert advice.