• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires offer a warm, cozy form of heat that has no harmful gases or soot. They are easy to set up and operate, similar to electric fires.

The contract funded by BARDA supports the development of the BioFire Emerging CoV Panel, a nucleic acid amplification test for use with BioFire FilmArray Systems to identify known and emerging human coronaviruses in nasopharyngeal and oropharyngeal sw and saliva specimens.

Eco-friendly

A bioethanol fire can be an excellent eco-friendly alternative to wood or gas fires. The fuel is produced using plant by-products, and the natural process converts sugars into alcohol. It is a better choice over other fireplaces as it produces no harmful emissions and has less carbon footprint. Bioethanol is also a safer alternative to other types of fires since it doesn't create soot or smoke. It also does not require a flue, which means it can be set up anywhere in your garden or home.

A multi-drug resistant (MDR) bacteria is among the most serious health threats of our time. New testing methods can identify MDR bacteria early and help prevent further complications. BioFire FilmArray is one of these tests. This test employs the symptom driven approach to identify pathogens that could cause sepsis. Its results are available within a matter of hours, so providers can begin treatment immediately.

The Molecular PCR process increases DNA and RNA molecules to millions or billions of copies. This allows you to examine small amounts of tissue or body fluid for the presence of specific genetic sequences. It is a useful instrument for lab professionals, and it can help them diagnose serious illnesses in an efficient and cost-effective way. The BioFire film array PCR system is a revolutionary tool for infectious diseases diagnosis. It can be utilized in a variety of environments including laboratories and hospitals.

In the case for tests of your respiratory system, you could apply a swab of alcohol to your nose prior to sending it to the lab. BioFire’s system allows clinicians to respond quickly and with a short turnaround time. This means that patients will experience better outcomes and will not have to wait for results.

The Chanouf Farm Biofire company has developed an agroforestry recycling unit that makes use of olive and pear waste to make biochar and biomass power. The resulting products are offered to the public as a sustainable alternative to traditional coal briquettes and wood charcoal. In addition they can be burned in a Kachelofen fireplace that provides radiant heat that is greener than electric and gas-fired fireplaces.

Clean burning

When you use bio-fire, you're not just reducing energy consumption, you're also helping the environment by using a renewable fuel source. This is because the burning of bioethanol doesn't release any harmful gasses like carbon dioxide. It releases only water vapour and heat. This makes it a safer and cleaner option for indoor use.

Ethanol is made from the fermentation of sugars in plants and is classified as a renewable fuel source. It can be produced quickly and won't be depleted like fossil fuels like oil and coal. Bioethanol can also help reduce dependence on foreign imports and reduces the risk of supply shortages.

Bio-fires are very easy to install and can be utilized in existing fireplaces or as freestanding units. This makes them an alternative to wood and gas fires. They are an excellent choice for offices and homes that don't have chimneys.

When a bio fire is lit, a special media is built into the burner that absorbs the liquid fuel ethanol while making it ready to be used for combustion. The ethanol is burned by the flames, and the vapours are expelled out into the atmosphere through the vent. The flames appear more natural and gives an amazing beauty that cannot be replicated with gas or real wood fires.

Another big advantage of bio ethanol fire-fires is that they don't require a flue or vent to replenish the oxygen used during combustion. They don't release carbon monoxide which is released into the room by gas fireplaces with open fronts.

The BioFire Respiratory panel uses multiplex PCR to simultaneously test for respiratory pathogens. This takes about an hour. This allows doctors to detect and rule out respiratory illness more quickly than conventional tests that require visits to the patient. Both the patient and the health system benefit from this.

Safe indoors

Bio-fires are safer to use indoors than real fires because they release no smoke, ash or carcinogenic fumes. They also do not emit carbon monoxide, which could be deadly if inhaled. However the bio-ethanol fires fuel is flammable, so you must be cautious when handling your burner and refilling it. The fuel should only be added after the burner has been switched off and the fire has been cooled. Any spills must be cleaned up immediately.

The company's diagnostic FilmArray system - BioFire Torch and BioFire 2.0--are easy-to-use and can run eight different diagnostic panels that have been cleared by the US Food and Drug Administration and three additional panels that are approved for emergency use and six environmental test panels. The tests include a respiratory panel that was developed to quickly recognize and distinguish respiratory illnesses including COVID-19, emerging coronaviruses, and COVID-19.

Its COVID-19 panel has been granted a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 system is based on antigens, and allows clinicians to differentiate symptoms caused by COVID-19 from other respiratory illnesses. The test has a similar accuracy to the rapid antigen tests that are currently used.

The company is also working on an SARS-CoV-2 test to be used in its Respiratory Panel 2.1. The multiplexed nucleic acid amplification assay will be available for use on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 as well as 21 other respiratory pathogens in nasopharyngeal or saliva samples within less than one hour. The test is being developed in a speedy timeframe, and submission to the FDA for EUA and 510(k) approval is expected in the third quarter of 2020.

Bio-ethanol flame effect fires are safe to use, but must be kept away objects that are combustible, such as pillows, curtains and blankets. They should not be placed near anything that can catch fire. Keep flammable materials away from the fires that cause flames by at minimum 10 feet. The bioethanol fuel should be kept in a secure, dry area where it cannot be easily accessible by pets or children.

Simple to use

A bioethanol fireplace is simple to operate and doesn't have a flue to be concerned about. All you need is a place to put it and some fuel. Once you have filled the burner with fuel, ignite it. This will create a flame that looks just like an actual fire. After the flame has been ignited it will warm the room but with very little or no smoke. It will also produce heat like a biofuel Fireplace insert (assembble.com) that burns wood. bio ethanol fireplace insert fires are also easy to maintain and don't require any maintenance or maintenance, other than the occasional cleaning.

The BioFire RP2.1 EZ test, unlike most rapid tests that employ a syndromic method to identify the symptoms of common infections, can provide results in 45 minutes. The test is designed for patients suffering from upper respiratory symptoms and has a 98% sensitivity rate. The test can detect up to 19 bacteria and three viruses in one test which makes it a good option for the treatment of patients.

The BioFire platform integrates multiplex testing, sample preparation and result reporting in one integrated platform. This allows laboratories to simplify their workflow and eliminate the need for a series approach involving individual and send-out tests. This can result in improved patient outcomes by enabling the right test to be used first time, and also by removing the need for expensive tests based on culture. The BioFire system can identify pathogens on a cell level as well as their antimicrobial resistance gene. This information is more sensitive than the conventional methods.

Molecular diagnostics is increasingly used to improve the outcomes of patients and care. The BioFire panel RP2.1+ employs a syndromic method to simultaneously target 23 pathogens that are commonly implicated in respiratory infections. The test can be run on the BioFire FilmArray 2.0 and Torch systems and delivers results in about 45 minutes.

In the US, this assay is currently available under FDA Emergency Use Authorization (EUA) and will be made commercially available after the initial DoD demand is met. The BioFire Defense team has also developed a fully automated sample-to result assay for rapid identification of COVID-19. The assay is currently being developed and will be available once initial DoD demands are fulfilled.