• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet come and go whenever they want, without you having to let them in or out. They can also help prevent your cat from toileting inside the house.

It is much easier to put an animal flap on a upvc panel than one made of glass, but you will need some skills and the correct tools.

Measure the Door

Installing a cat flap on the door isn't easy but if you use the correct type of cat flap, take your time and follow the steps provided it should not prove to be too much trouble. We will be showing you how to draw the shape, then use the jigsaw to slice the door's area and then complete the job by securing the flap to the door. This will ensure that the flap stays in position and also protects the doors with cat flap from the damage caused by wind and rain.

To determine the size of the cat flap that you require, take a measurement of the width of your pet. This will ensure that the flap is large enough to allow your pet to leave and enter the home without having to open or close the door each time, but it is also small enough to prevent the pet from straying too far in either direction.

Once you have the measurements you can determine the area on the door where the template should be placed. usually, this is done using an X. However, some kits come with an illustration that outlines the location to drill, if yours does then stick it to the door and use a pencil to draw around the door. If your door has a sill or moulding on the bottom edge of it ensure that you have clearance from these to ensure your cat's safety and stop them from gaining access to your home.

Put on your eye protection as well as a dust mask, and using a jigsaw start cutting along the line that you've drawn in, don't try to press the blade too hard because this could cause it to cut more quickly than you would like it to. If you have a set square then use it to check that you are cutting correctly and to ensure that the hole is a good rectangular shape. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without worrying about them being a nuisance to a visitor, or leaving unwanted gifts in the home. It also helps prevent draughts and keeps your home's temperature stable. Installing a cat flap on your door may seem daunting to those who haven't done it before. Many people call an expert joiner or carpenter to do the job. This is an option but you can do it yourself, provided the tools are appropriate and the steps are followed.

This is much simpler to do on a wooden door, but it is possible with uPVC. However you should be cautious not to harm the doors because this will make it impossible to claim your warranty. The first step is to take measurements of the door, making sure that it can fit the new cat flap. If you have a standard uPVC panel, this should be easy. However, if your door is made of composite or another kind of door, you may require more care.

Next, you will need to determine the belly height of your cat. This is the distance between the floor and the bottom of your cat's stomach. You will need to find an area on the door that will allow your pet to move through easily. Once you know this, you will have to draw the area using pencil and a spirit level so that you can be sure that the hole you make will be a good fit for your cat.

Once you have marked out the area, it's time to make the hole. It is crucial to be patient and use a jigsaw to ensure the cuts are clean and smooth not rough and uneven. This could cause damage to your door. You should also remember to wear safety glasses and a dust-proof mask whenever working with the jigsaw as breathing in the dust could be hazardous to your health. After you've completed the cutting process, you will have to smooth out the edges of the hole using sandpaper, so that your cat flap can be fitted easily.

Make a hole

The process of fitting cat flap in upvc door panel (browse this site) a cat flap cost flap to an existing door panel or double glazing sealed unit can be quite difficult. If you are not very skilled in DIY, it's best to employ a professional to complete the job for you. A botched job could not only be ugly, but also pose security risks. It could allow cold air to enter when the cat is outside and hot air to escape when the cat is inside.

The first thing you have to do is draw the location of the hole in the door with an eraser and a spirit level, this will ensure that it is properly placed and runs flush with all the other parts of the door. Make sure you have some sandpaper in your possession to smooth any rough edges.

Wear any safety gear you require when working with the power tool. If you're worried about noise, you can get a jigsaw with a cord that is quieter and more user-friendly.

It is important that you only cut away the material that is required to make the cat flap. It is necessary to leave some extra material to make the wall thickness of the cat flap. However cutting away too much could cause problems or even damage the door frame.

A upvc door may contain a metal frame or panel that will interfere with the microchip cat flap, and in this case you will need to cut an oversize hole to ensure the metal doesn't touch the the cat flap. If this is done, fitting cat flap In upvc door panel it is important to fill in the gap and render it watertight.

If you're planning to install the cat flap onto a upvc door panel replacement cat flap door or double-glazed window with a metal frame then you will need to speak to a professional who can provide you with a new pane of glass that already has the hole for the cat flap premade in it. This will be less expensive than trying to install a cat flap inside an existing pane of glass that was not designed for this purpose.

Place the Flap

Cat flaps allow your pet to leave and come at their own pace, giving them the freedom to lounge in the home whenever they want to. However, fitting cat flap In upvc door panel if you have an uPVC door it can be difficult to install an animal flap, especially in the absence of glass panes that can be cut to accommodate one. Luckily, if you're happy to buy and install a new half-glazed uPVC panel, it's possible to add a cat flap to these doors. It's not as easy as cutting a hole in the door however, and there are a few things you'll need to take care of first to ensure that it's secure.

A uPVC, GRP or composite door panel is typically made up of an extremely thin plastic outer skin bonded to a soft polystyrene core that is insulating. It is crucial to be careful when cutting the material. This type of door usually has a template which you can use as a guide to cut the hole in your door.

Once you have marked the position of the hole in your door, it's time to put in the cat flap. You can buy and fit a wide variety of different models, from basic push-button operated ones to microchip activated units that only let in your pet. Whatever type of cat flaps you choose, it's vital that your cat is able to use the flap comfortably without getting caught in bad weather.

It's a good idea to opt for circular fittings instead of a square one, as circles are more securely cut into door glass. This is because square holes are more likely to break the glass when they are drilled. It's also a safer option as you're not at risk of drilling into toughened glass that might break and injure your pet or family members. This is especially crucial if you have children or elderly people in your home that could be hurt by glass shards.