• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can seem intimidating but it's simple with the proper instructions. Decide how high you'd like the flap to be (normally it's located at the belly height). Then, mark this area on the door and then use the template provided as a guide to drill.

If you have a kitten that is still a newborn then gently prop the door slightly open and allow it to walk through. Reward the kitten as it passes.

Take a measurement of the door

A cat flap allows your pet to go in and out of your home at any time. This can help keep your cat healthy since it ensures that it is getting enough exercise and also be able to go back inside when it is stranded outside in bad weather. This can reduce the time you have to let your cat go in and out and also make your home secure by notifying you when it's gone.

It is crucial that the flap on your cat is properly fitted to stop your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's belly and the doorway of your house in order to make sure that the flap is at the proper height. You can adjust the height of your flap if your cat is taller or less than the average.

The next step is to use a spirit level to mark the center of the door. This is where you'll install the flap. With the markings as a guideline, you can use an jigsaw to cut the form of the flap within the door. Once you have cut out the space, sand down the edges of the door to create smooth surfaces. You can then drill any fixing holes needed.

Fitting a cat flap should not take more than two hours. However, the process could be a bit more difficult in the event that you have to put it onto a replacement upvc door panel with cat flap or composite door since these doors come with various thicknesses which can affect how the holes are cut and the type of door they are fixed to. This is the reason we recommend hiring a professional to complete the work, particularly if you have never worked with glass before.

Measure Your cat Flap Step

A cat flap will save you from listening to your pet meow for you to let it in or out. This is particularly helpful for cats that are inside in all weathers while you are at work.

It is important to measure your cat's measurements first before you attempt the installation. While it may seem an easy task, it is crucial to measure the right way or your cat may find it difficult to use.

First, make sure your cat is calm prior to taking measurements. You'll need to put your cat in a position that they are unable to move. Also, cat flap step make sure that the measuring tape is flat and not curved against their body. You can get a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat, it is time to take a look at the door and decide on where you want to place the flap. It is advisable to position the flap at the height of your cat's belly because it will allow them to move through it with minimal effort. This will also prevent the flap from making a lot of noise as it opens and Cat flap Step closes.

It is also important to take into consideration the thickness and structure of the uPVC door or composite. While timber doors are all of the same thickness, uPVC and composite doors may differ in their overall structure and this can make the installation of a cat flap insulation flap more difficult because you must make sure the hole you cut is the right size for your pet.

You can also use the template included in the instructions to mark the location of the hole on the door. This will allow you to determine where the opening must be and make sure that the template is properly placed on the door. It is also helpful to use a spirit-level to ensure that the template sits flush against the door.

Cut the Flap

You will need to cut a hole in the door to accommodate your cat flap prior to you can install it. It's a challenging task and it is recommended that you engage a professional to assist you if you don't have the expertise or experience. It is also recommended to read the instructions included with the kit to learn how much to install a cat flap to do it correctly.

You can take the height of your cat's or kitten's stomach to guide you. In general you should place the flap approximately 10-15 centimeters above the ground. This is the standard height of the cat's belly. This will allow your cat to pass through the flap without difficulty and make it more difficult for other cats and nosy neighbours to get inside or out.

Draw the location of the cat flap on the door with the pencil. Then, if your kit comes with a template for paper, place it on top of the door and use the markings to drill holes in each corner of the template. You should then be able to cut the template's shape and replace it with your cat flap.

You can put in your cat flap yourself inside the door made of wood or uPVC when you're confident using the jigsaw. Be sure to not cut into any of the door's mullions or vertical rails. You can use a Jigsaw to cut your panel into a square or a circle, depending on how you want it. Take your time and don't force the jigsaw into cutting faster.

Once the hole is cut, carefully fit the cat flap into its new location and make sure that it's securely secured. If it features screw caps, then push these caps onto the protruding screws. Once the screws are in place, sand any rough edges of the cut and then apply sealant to any gaps to ensure that there are no draughts coming into your home.

Install the Flap

If you have a standard cat flap, you can encourage your pet through it by placing a small amount of cat food on the front of the door. Alternatively you can try pushing the cat flap fitters through using your hand or a stick. Once your pet is used to moving through the flap, it is likely to be able into and out as it wants so you can let it in or out without having to be there to open the door to allow it in all day (and likely in all weathers).

You can install a cat flap into a UPVC or glass door although this may not be as simple as fitting one into a wood exterior door due to the fact that the UPVC and glass doors don't have a consistent thickness. This can have a significant impact on how you cut the opening for the flap and will also affect whether the flap will fit properly once it's been installed.

Depending on the model of cat flap you pick It could include a mounting kit and template that will tell precisely where to drill the holes for it. If the kit does not include the template you can use a photocopier to make your own. It's important not to use the jigsaw to hard when cutting, so that it doesn't create a larger than necessary hole in your door.

The majority of cat flaps are square or rectangular in shape, but there are also some which are circular, and are usually more difficult to install. If you have a circular flap it is essential to ensure that the hole is in the correct position on your door because if it's not, the cat will not be able to use the flap and may be stuck in the open all day (or even night).

Some cat flaps have locks that allow you to control the time your cat can enter and leave. These are useful when your cat is scared of going out in the dark, or coming back to the house at night. They can also be helpful if you work all day. The lock can be turned on for entry or exit and some are locked in both directions, allowing you to shut the door completely. This is especially beneficial for cats with a chronic illness or older age who aren't keen on going out in rainy weather.