• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why Window Repair Is Necessary

Cracks in window glass can be caused by a small pebble by the lawnmowers, or a heavy beverage placed on your table with a glass top. A damaged window may let rain, wind bugs and other harmful elements to get into your home.

There are ways to repair a cracked glass and stop it from spreading.

Water Damage

If water is leaking through your windows it is likely that a replacement is necessary. Moisture can cause rot in the wooden frame of your window. It also can reduce the energy efficiency of your windows. A reputable window replacement company can replace your frames without damaging them.

Wood rot is another problem that can affect both the interior and the exterior of your window. If your windows are made of wood and have spots of rotting, a repair may be possible when the rot isn't advanced. If the rot has gotten to your mullions and muntins (the parts of the window frame that hold your glass panes), you may need to rebuild them. This could be more expensive than buying a brand new set.

A deteriorated seal between double-paned windows is another common problem that requires replacement. This could be caused by condensation or debris between the double-paned windows or a sign that the insulation of your window has failed. Many modern windows come with insulation built-in. This means they don't face the same issues as older, multi-paned windows.

A cracked, loose or rotting casing around your window is not attractive and could cause other issues. It is not necessary to replace your windows if the casing is damaged. You may be able to sand it and then repaint it to enhance its appearance based on the condition and surrounding wood.

If the exterior casing of your home is damaged it is possible to apply a fresh coat of weather-resistant paint to keep water from destroying the window. The installation of a new exterior casing could be a stylish and Window Repair practical upgrade to your home.

Chipped or Peeling Paint

Window sills and frames are often close to the elements and suffer from the sun and rain. Moisture is the main reason for peeling paint around windows, particularly if the wood is exposed. The water seeps in to the wood and, when it evaporates, the pressure under the paint film causes it to lose adhesion and peel. Moisture can come from condensation in the interior, or from rain and snow on the outside. No matter the source, it's important to scrape and sand the surface and then repaint when the paint begins to chip. Some meticulous painters apply a water repellent preservative on the wood, and then thin boiled oil before painting. This will help slow moisture penetration into the wood, which helps the new paint to stay better.

If paint starts to crack, it's time for a window repair. To catch any paint that may stray on the surface, put a drop cloth or tarp over the area before applying a new coat. Using a utility knife, carefully scrape off any paint that is loose. Be careful not to slash the wood underneath or cut through the sheathing. Clean the area thoroughly and allow it to dry completely.

After the area has dried, sand again with a fine sanding pad. This will prepare the surface for primer and create a base that is ready to receive paint. Make sure you have the appropriate safety equipment if you're using paint that is based on lead. Tape off any surfaces that are close to the sanded surface like baseboards. This will protect them from paint.

You can then prime and paint according the instructions on the tin you are using. Be sure to follow the curing and temperature guidelines on the paint can as they differ by type. Paint the exterior with exterior grade paint, and the interior surface with interior-grade paint.

Repairing peeling or chipped painted frames is a less expensive alternative to replacing frames. If your window frames can't be repaired, it might be worth upgrading to newer energy efficient windows.

Cracked Glass

A damaged window repair near me leaves your home vulnerable to winds and rain, as well as bugs. It's tempting to replace the glass, but you could repair it yourself if there isn't too big of crack or break. It's best to address small cracks as soon they occur, before they become worse as time passes or temperature changes.

There are a myriad of methods to make broken glass invisible however, this is not a good order for a DIY project. Even a tiny chip can cause a crack in the glass, which can lead to more breaks and a costly replacement. Covering the crack with plastic is a great solution. It covers it from the outside and prevents air or moisture from getting through, which can damage the frame or seals around the windows.

Before you put on the plastic wear gloves and safety glasses and take the broken piece of glass from its frame. You'll need a utility knife, scraper or chisel to get rid of any old glazing points that bind the glass in the frame. Make use of the knife to remove any bare wood, then finish it off with linseed or a clear wood sealer.

You can then make use of epoxy to stick the glass back in place. This is the slowest option, but it will also give your glass a more robust appearance. When using epoxy, choose the double-cylinder type that dispenses the resin and hardener in the same proportion. This lets you precisely control the amount applied to the glass which will ensure a solid seal.

If you have double- or triple-pane windows be sure that the gas fills are intact when you reset the glass. These gases are important for insulating your home and ensuring that heat is kept in during winter and window Repair out in summer. If you take the glass off these gases escape through the crack, causing the window to lose its energy efficiency. You can replace the gas fills with the same method that is used to repair cracks in other kinds of glass.