• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a lost subaru car keys Key Fob at Home

Depending on how old your subaru keys is, you might need to have your key fob programmed by an automotive or dealer locksmith. This is usually accomplished through the connection of a programming machine to the computer in your car.

To program your subaru key programming begin by opening the driver's side door using the door button control, and then close it. You will hear a chime on the instrument panel and the dome lights will blink.

Step 1: Locate the Transmitter Circuit Board

There are many ways to program your key fob. First, you must be aware of the type of key fob you own. This can be done by looking at the shape of the key fob or by listening for a chime in your car.

Once you have the data then you can begin the process of programming your keyfob at home. To accomplish this, you'll need a metal key and a flathead screwdriver. Open the key fob by twisting. Push the key's metal part into the case and then let go of the battery by pressing the tabs holding it in place. Replace the battery and put the case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is a smart idea as it can help revive key fobs that aren't working anymore. In some instances buttons on the key fob could be damaged. If you see that the metal contacts of the button have become loose Try soldering them back into place again in order to make them function again.

Be sure to turn off your ignition and close your doors before you begin. You can do this by closing the driver's door and pressing your door button ten times in quick succession. Then, you should hear the instrument panel chime, and your dome lights will flash. This indicates you're now ready to proceed.

Step 3: Insert the fob of the key into the ignition

Many articles on the internet will tell you how to get a spare subaru key to program your brand new or replacement subaru transponder key keyfob at home. However, most of them do not provide precise instructions. Reprogramming an electronic lock is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat, with all doors closed and the engine off. Use the door button control and use it to unlock all doors. Open and close the door to the driver's side two more times. Insert and remove the ignition key (don't rotate it) 10 times in 40 seconds. The system should chirp to confirm that the settings have changed.

Step 4 4. Turn on the ignition.

Before proceeding with this method of programming your key fob, it is crucial to know that this method works only with a functioning key already. If not an auto-locksmith or a dealer will need to program a key for your Subaru Fort Bliss.

After your key has been programmed you should be able start your car in about five seconds. Begin by closing all doors, then turning off the engine. Then, sit in the driver's seat and unlock all doors with the door button control. Insert the key into the ignition, turn it on to the off position (the electrical systems will turn on, but the engine will remain off) then return to the off position ten times in rapid succession.

Step 5 Step 5: Unlock Driver's Door

Subaru offers a wide range of luxury automobiles with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. These devices may stop functioning.

To resolve this issue to resolve the issue, you should call a locksmith or a dealer. This will resolve the issue and ensure that your vehicle is secure.

To do this, you must open the driver's door, then close it. Place the key in ignition and then turn it back to position 1. Then, you can return it to the off position. Do this as fast as you can, ten times. After the tenth repetition you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

If you're looking to replace the battery in a Subaru key fob, the process is easy. Unlock the exterior fob case. Use a flathead for prying the casing open inside and then remove the batteries that were in there.

After taking out the old battery, replace it with a new one and close the case. Then, you can sit in the driver's seated position and unlock all the doors using the door button control. Finally, place the key in the ignition and turn it to ensure that the electrical systems are powered on, but the engine is off. Repeat this 10 times until you hear a chime from the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoying sound heard when locking or unlocking the Subaru key fob from outside can be distracting. In some cases, the chirp can be disabled by opening and closing all doors, and then a double-click of the lock button on the key fob.

Switch the ignition off and close all doors and the lid for the fuel-filler. For 10 seconds you need to press and hold the lock button on the key fob. When this is done the instrument panel will emit an audible chime. The chirp indicates that the lid of the fuel-filler door are locked. The setting can also be altered to ensure that the doors and lids for the fuel-filler lock automatically without pressing the request switch.

Step 8 Step 8: Enter the 8-Digit Transmitter Number.

Remember the first 8 digits in your head. Now, sit in your driver's chair, close all doors and turn the ignition to the first position (towards towards). After ten turns, the instrument panel will sound once.

The circuit board that controls the transmitter is in the key fob's case. The circuit board should be able to display one or two 8-digit numbers. Note the first number sequence and follow the steps in this guide to register the code into the system of your vehicle. For older models, this process may require a visit to the dealer.