• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Secure your prized possessions from thieves by adding a ghost immobiliser. Our TASSA-verified system protects against hacking, key cloning and vehicle immobiliser bypass.

The system is hidden in the wiring loom in your vehicle, so it is completely inaccessible to anyone who is looking. It is created by generating the pin code push sequence that is pushed through buttons already present on the steering wheel, door cards and central console.

No circuit cuts

It's not a surprise that people are concerned about protecting the car they've spent so much money to purchase. Traditional security devices, like wheel locks or alarms, can be easily bypassed by thieves. A ghost immobiliser, on the other hand is a highly efficient solution that works silently and is not easily identified by modern thieves.

A ghost immobiliser, also known as a hidden device, is a device that connects to the data network of your vehicle's CAN to shut off the engine. It does this without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU by using buttons on the steering wheel, dash and door panels to generate a unique pin code that only you can access. The code can be altered at any time and can be up to 20 digits long, depending on what you prefer. It also comes with an emergency code that you can use in the event of forgetting your PIN.

The ghost immobiliser is beneficial to stop the relay box at your home from transmitting the signal of your car key, which would open the doors and begin your vehicle. It also blocks high-tech methods to steal your vehicle, like OBD port hacking. The device is small and weatherproof, which means it's difficult to detect and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be installed in your car without any permanent marks. This makes it ideal for those who intend to resell their car in the near future. It's also quicker and simpler to install as when compared to a factory-fitted model.

The Autowatch Ghost, a groundbreaking new generation device, stops contactless car thefts by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a hidden system that can be installed without removing wires and requires no additional key fobs. It also connects to the vehicle's original ECU and prevents thieves from gaining access by using an additional key or replacing the ECU with an "relay". This system is TASSA-certified and can be linked with an International Security Register. Owners will be able to rest easy knowing that their vehicles are secured from theft.

No RF scanning

You'll want to safeguard your vehicle from theft when you have spent a lot of money and time customizing it. One method to accomplish this is to install an immobiliser, which will stop your engine from running until you enter a unique pin code. You can create a 20-digit pin using the buttons on your dashboard or the steering wheel. This will ensure that only you are allowed to drive your vehicle. You can also set up a valet and service mode that will allow you temporarily to start your car without having to enter the PIN code. This allows the technician to work on your vehicle without you being present. This is a great feature for those looking to cut down on time and make their lives simpler.

A ghost immobiliser is a next generation device that connects to the vehicle's CAN data network and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend into with the rest of your vehicle, since it doesn't emit any sound or LED indicators. It can be placed anywhere on your vehicle, without affecting the aesthetics.

This stealthy device is TASSA approved and could reduce the cost of insurance. It comes with a tracking feature that can locate your vehicle even if it's been stolen. This is great if you own a rare, expensive vehicle which you've invested a lot of effort customizing.

Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your car if you have forgotten your PIN number or are unable to access your vehicle. This feature is perfect for those who need to go on errands or pick up your kids, but do not want to let someone else drive your vehicle. It is also helpful if you need to take your vehicle to a mechanic for maintenance or repair.

The Ghost is unique in that it doesn't transmit or detect radio frequency and is therefore undetectable by thieves who use RF scanning and code grabbing techniques. It can also safeguard your vehicle from key copying, ECU swapping and other typical methods of theft.

There is no key to cloning

Ghost immobilisers are a great way to protect top-end vehicles and stop key cloning. They prevent your vehicle from starting without a PIN code being entered along with the regular key fob. This makes it more difficult for thieves to steal your vehicle, and may even stop them from trying. This is a great idea if you've spent a lot of time and money in customizing your vehicle, or own a rare or expensive model.

The immobilisers are connected to the vehicle's CAN data network and are completely hidden which means there is no visible indication of its presence in the vehicle. It is also impossible for thieves to identify the device using radio frequency scanning or code grabbing technology. This means that a thief will need to take longer to take your vehicle.

A criminal will need to be aware of the pin code and Ghost immobiliser the exact location of the ghost in order to avoid it. The pin code is unique to you and can alter it as many times as you want. The pin code is easy for you to remember but mathematically impossible for anyone else to work out. In addition, the engineer will have provided you with an emergency PIN code to override if you ever forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It works with all vehicles and can be completely customized to match your vehicle's style. It is also very affordable and easy to use. You can even transfer the device to another vehicle if you switch vehicles in the course of ownership, provided that the new vehicle is compatible with the.

The CAN bus is compatible with other security features. For example, it can detect damage to your vehicle and notify the owner. It will also shut off the engine if it senses that the car has been tampered with. The system also protects your vehicle from hacking and key cloning. It also detects vibrations and contact with the vehicle. In addition, it could warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, disable your key fob and code new keys. This technology is a significant improvement on traditional methods that have been employed by thieves in the past to steal your car. The CAN data network also means that your system won't be affected if you disconnect or change your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking and theft of replica cars. It does not utilize LED indicators or key-fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.

Modern thieves employ diagnostics to find circuit breakages in your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated in the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not able to be detected by professional diagnosis tools. It can be installed even on vehicles equipped with anti-theft devices.

A Ghost immobiliser has another major advantage: your vehicle will only start by someone who knows your PIN and physically has access to your vehicle. This is a major advantage over traditional security systems that can be bypassed with simple cable manipulation, a screwdriver, or the utilisation of a universal remote controller.

If you forget your PIN you can reset it easily by using the emergency PIN override function on a mobile phone or computer. This is useful in the event that you have to start your car ghost immobiliser when it's been left in a garage or a valet parking service.

The Autowatch Ghost 2 is the most recent version of the product, and is affixed to insurance by TASSA when installed by one of our authorized installers. It has a QR fingerprint system to identify parts that are not in use that allows for the return of stolen items in the event that they are found. It can also be turned into a service mode,' which allows the engine to start when your vehicle is parked in a garage or with valet parking, however, you'll need to enter your PIN again to exit the vehicle.