• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to repair a damaged window handle using the appropriate tools. It is essential to know the type of handle you have as well as the size of its spindle before you purchase an alternative.

Older uPVC window handles have a spur which protrudes and locks on a wedge striker for cockspur. These can be left- or right-handed and must match when replaced.

What kind of lock or handle do you have? I have

There are many upvc window locks and handles each with their distinct advantages and functions. The type of handle you own will determine whether or not the locking mechanism you have is effective and if it is easy to open the windows. Over time and through regular use, window handles made of upvc can become damaged or worn out, making them less secure and effective. In certain instances, they might even fall completely off. It is crucial to fix your upvc window handles when you notice they are falling off. This will help prevent burglaries and will keep your home secure.

Luckily, replacing your window handles made of plastic is a relatively simple task that can be done by nearly anyone. You'll need a few basic tools, but with proper knowledge, it's an easy task that will only take a couple of minutes. To begin you'll need to determine the type of lock and handle that you have on your window made of upvc and then identify the best replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have an elongated spindle that runs through middle of the handle to the window frame to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are held to the frame of the window by one screw, and are less secure than other types of window handle.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles because they can be rotated to open the window and then tilted into the window to ventilate. They have a 7mm spindle in the back and are available in right-hand and left-hand versions.

When purchasing double glazing replacement windows handles made of upvc, it is important to verify the length of the spindle as not all are identical in size. To test the length of your upvc handle simply drop something into the middle of the hole and then measure how far it extends before it comes into contact with an obstruction. This is the maximum size of spindle that will fit your windows.

What is the spindle?

uPVC window handles work in a similar way to doors, by turning the handle to open an opening inside the frame. This unlocks the window so it can be opened and closed. The handles can become damaged, particularly if they're often used or are exposed to harsh conditions. You may have to replace the handles on your uPVC window if they are not operating correctly.

There are many different kinds of uPVC handles available including Espag, Cockspur and Spaded handle options. They are designed to fit in the uPVC frames in a variety of ways. Each handle uses a specific spindle to lock the mechanism fitted to the window. This is why it is essential to know what type of handle you have installed on your uPVC window to find the right replacement for it.

You can check what type of uPVC handle you are using by looking at the base section of your handle. A snap-in cover is over the screw that holds the base of the handle in position. Remove this and then you should be able see the second holding screw located at the opposite end of the base portion of the handle. After both screws have been removed and you are able to remove the handle from the uPVC.

After removing the uPVC handle, carefully remove it from the locking mechanism. Be sure to note the length of the spindle as you will need to ensure that you purchase an alternative that is the same length as the original handle and locking mechanism.

The main issue with most window handles made of uPVC is that the spindle becomes worn out and can no longer operate the locking mechanism. This could be due damage caused by constant use, a loosening of the locking mechanism or even corrosion over time. When this happens it is required to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.

How do I take off my old handle?

Over time and through everyday usage, window handles could become damaged or broken, and when this happens, it is essential to fix them as soon as you can to ensure the security of your home. It is easy to replace a worn or damaged handle. The task can be accomplished in under a minute without the need for any special tools.

To take off the handle, first remove the screw at the bottom of the handle. Once the screw is removed, the handle will be pulled away from the base. Another screw will be located at the base of the handle. This too can be removed. Once both of these screws are removed the handle can be removed from the base portion of the window.

Once the old handle has been removed, you can take the new handle and line up the fixing holes with the holes present in the window frame. There might be a small cap or sticker on the new handle, so take off the caps if needed, and then screw the handle in place. It is essential to ensure whether the handle functions after it has been installed. Turn the handle around and ensure that the lock mechanism is activated.

Espag handles come with spindles that protrude from the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows have a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over the frame's outer or transom bar cross-member within the window.

After you have installed the new handle, insert the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is fixed. The handle is now ready for use, so try opening and closing the window several times to make sure that it is working properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult and the process is simple. All you need is a screwdriver and a small amount of patience. The first thing to do is make sure that the handle you have previously used is not locked and then remove any screws that are visible, you can also replace them by screw caps if you need. Once the handle is removed and you are ready to take a note of the length of the spindle that extends from the back of the handle. This is crucial because it will determine the type of handle you need to purchase.

Espagnolette handles are the most commonly used kind of handle that is used on uPVC windows. The spindle runs through the handle to operate the locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. During regular use and over time, handles made of espagnolette can be damaged.

Cadenza handles are a different kind of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding blade that operates the multipoint locking mechanism inside the window. They are more secure than espagnolette handles because they are able to open from the inside. They can be replaced using the same method as you would for espagnolette handles however, ensure that the new handle is not angled and flat.

Once you have selected the correct handle, simply align the new handle with the existing screw holes prior to screwing it into place. Then, Window Handle Replacement you should put the screw covers on and test the new handle. You can accomplish this by dragging the handle back and forth from the locked position to the unlocked a few time. It is possible to contact an expert to see how you can fix any issues. They can advise you on how to fix the issue in a timely and effective way.