• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Window Repair

Sash windows can be out of balance, or even break. Pam scours the web for salvaged, wavy glass and keep an eye out for discarded, metal sash weights. She then seeks replacements in the form of washers or nuts to help balance her window.

Pam covers each pan with a rope of glazing compound she works into the rabbet groove, also known as a pocket, around the opening. This prevents drafts and reduce the cost of heat loss.

Sashes that stick Sashes

It's a nightmare when your double-hung windows become stuck. You'll lose sight if they rattle during a thunderstorm. A window that's too loose could let in external noise and air which can increase your energy bills. Neither scenario is ideal, but both can be fixed with the appropriate tools and perseverance.

A common issue with old weighted sash windows is that paint could build up in the channels they slide over, causing them blockage. Most of these problems can be resolved by cleaning and oiling the tracks.

Begin by removing the caulking that was between the window stop (the one inside) and the window frame. Scrape off any paint that has accumulated. Make use of a sharp knife and put plastic sheets and dust-collecting vacuum cleaners below the surface to catch any paint dust or chips.

Clean the tracks with a dry, clean cloth and apply a silicone lubricant to ensure better gliding. You can find this in many home improvement stores or online. Then move the sash up or down to test it.

If it continues to block the sash cable could be defective. Examine whether the cord is tangled or hanging from the sash, or if it's snapped. If this is the situation, you'll need to replace the window's cord.

A pin that keeps the rail in place could have fallen out. This can be tricky to fix, and you'll need to consult an expert in the majority of instances.

If a pin hasn't fallen out but the wood has become warped or swollen, it's recommended to use a wood softener on it. This is a quick drying liquid that can help to restore damaged wood, so you'll be able to repair your window without having to remove it completely. Once you've used it, you should be able to break the two sashes by placing a block of wood on top of the bottom corner where they meet and tapping it lightly using the tool.

Draughts

Draughts can be a problem when you have an old sash window particularly in the winter. They can be caused by decaying wood, broken putty or worn cords for sash. This causes cold air to seep around the window, making it difficult to heat your home. You can reduce the risk of drafts by filling in gaps with expanding foam or by using draught-proof strips that are found in many hardware stores. They are efficient, but they will require replacing them regularly as the foam expands with usage.

A more permanent option is Gapseal which is a sponge-like seal that can be cut to the desired size and then insert into the gaps between the window repair near me frames of your sash. It can be applied on its own or in conjunction with adhesive strips on the bottom and top of the frame. This option is quite costly and will have to be reapplied throughout the course of your windows' life, but it can provide an option for the long term and is easy to take off if you want to open the window.

Another popular DIY method of draughtproofing is to use cling film scrunched up and pushed into all the gaps around your window. This is a reliable draught stopper but the downside is that it can block sash travel completely and may be a fire hazard. The sash must be removed to open the window and the clingfilm must be to be reapplied each time the sash is closed.

An alternative that is less expensive is to have your sash windows professionally draught proofed as part of a general refurbishment service. This can include new sash cords and parting beads, staff beads, lubrication of the pulley wheels and rebalancing the weights, in addition to painting or staining the frames and sashes. This will help restore the function of the sash, and increase its energy efficiency, while also dealing with any minor timber defects. It is much less disruptive than replacing the windows entirely and can significantly reduce draughts as well as improve your home's thermal performance.

Decay

The good thing is that your frames for sash windows aren't in need of repair if they've been damaged or degraded. The wood used in the frames of these windows is generally of high-quality and, with the right restoration, can be restored to offer the best performance for a long time. The key is regular inspections and ensuring that the timber is properly ventilated to avoid the accumulation of moisture which can lead to wood to rot.

The majority of issues that arise that arise from sash windows are readily apparent, however some are more difficult to detect. Wood decay is particularly difficult to fix, as fungus can eat the wood. While it is possible repair wood that is rotten but the best way to avoid future rot is by keeping the timber dry.

The first step is to strip any paint off the hardware. It is possible to remove the bottom rail from the frame and also the meeting rail (this will depend on the location of the sash). The "pocket covers", which are small pieces of wood that are placed on the frame's side that permit access to the weights will need to be removed. These are often fixed by nailing them in place and then securing them with paint, so you'll probably need to use an instrument to break them out of the way. After the pockets have been removed, you can begin to remove any wood rot and apply a good quality water-resistant wood filler. Once the wood filler has dried, a primer coat should be applied to prevent further decay.

It is a good idea to check the sash's weights inside the window too, to ensure that they are balanced and not swaying one side more than the other. The sash may fall off its track if they are not properly balanced. This could cause the frame to crack or become damaged. The sash weights can be replaced with new ones or a new balancing mechanism can be fitted that will stop the sashes from bouncing to the wrong side of the window frame.

Poor Security

Over time, sash windows can become exposed to the elements and susceptible to deterioration due to weather and general wear. This can lead to decay of timber, which requires replacement. The signs of decaying wood can be seen by water marks on the window, or the frame becoming soft to touch. It is important to consult a professional to assess the situation and determine if sash window repairs are necessary.

As time passes the rails at the bottom can also be damaged. This is evident by the presence of water marks on the sill or the window becoming soft. A professional is required to examine the situation and recommend any needed replacement of the sash window's seal or replacement.

Triple and double glazed sash windows do an amazing job at keeping noise out of your home, so it can be a major cause of worry when they begin to let it back in. If this occurs, the structural integrity may be at risk and the sash window may require replacement.

A common sash window repair problem is the sash becoming stuck in the frame. This can be due to a snapped sash cord, or it could be a sign of an issue with the sash the ratchets. If it is the latter the gentle pressure can help the window to be opened to reopen. Alternatively, the ratchets need to be reset.

The sash should be removed from the frame and removing the tracks of any dust or dirt can often aid in resolving this problem. After cleaning the tracks, remove any security fittings and carefully remove the chains or cords that hold the sash. A draught seal may be applied around the staff bead to reduce draughts and enhance the appearance of the paint finish. The gap between the box and sash can be filled with decorators caulk to improve sash operation and reduce draughts.