• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

It's a great idea tape the gap once the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may think about a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is usually due to screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most often, uPVC window repair near me leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Based on the severity of the issue the old caulking might need to be removed before a fresh layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your upvc window repairs window is difficult to open or it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier to do when you have a person to help hold the frame in place.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to give assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also become disaligned as a result of wear, creating a gap between the frame and sash. They can be fixed by giving them a good clean, but if they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock may also become disaligned. It is located on the hinge's side, and might require to be cleaned. In some instances it might be necessary to replace these.

The seals may wear out or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to recognize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as you can.