• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need find some plastic spacers that assist the new pane to fit correctly into the frame of the window.

If you're planning attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your property until a professional is able to repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is substantial, you may prefer an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, pvc which causes them to loose their elasticity. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial test fit. The corners of the sash need to align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This will only make your window more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely that the issue is more with the seal than the frame. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease it could be the hinges that are at the fault. They can be replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier to do when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you advice.

It is also crucial to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges, also due to wear and tear can become misaligned, this can cause an opening to appear between the sash and the frame. They can be fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to get them aligned or replaced. In addition, the interlock could also become unbalanced. It is located on the hinge's side and may need to be cleaned. In certain instances it is possible to replace them.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. However, it is important to realize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.