• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that has windows. This will give you the best of both.

2. Sagging

upvc window repairs near me windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. However, over time they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to reach the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and test it for fit. If you're happy with the fit, tighten the screws until they stay in the right place.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need close your window and do a test fit. The corners of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to act if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely the problem is with the seal rather than the frame. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease, it may be hinges at the fault. They can be replaced by any competent DIYer and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window but it's much easier if someone helps you hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become unbalanced due to wear, which can cause a gap where the sash and frame meet. They can be fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it is possible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is crucial to realize that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc it is recommended to speak with a professional immediately.