• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, you will need to source some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap between the window and the door is significant, you may prefer a security screen that also has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your upvc window repair near me window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

To fix a window repairs near me that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window to get to the frame. Then, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in a breeze. Any competent DIYer can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause an opening to appear where the sash joins the frame. If they're beyond repair, it might be necessary to get them re-aligned. Second, the interlock can also become unbalanced. It is located on the hinge side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. However, it is important to realize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.