• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double glazed window repairs near me panes are held together by internal beading, it is harder to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is large, you might need to consider a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A sagging uPVC Window Repair could cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can get at the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and check for fitting. If you're satisfied with the fit, tighten the screws until they remain in place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it can also be caused by the handle mechanism wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze, it may be the hinges that are at fault. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is essentially a very simple process but it can be easier with someone else to assist in holding the frame up.

Check that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window repair in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges may also become misaligned due to wear, creating a gap where the sash meets frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to have them aligned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace them.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be placed on the top of your windowsill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and they may reach an point at which it is more efficient to replace them than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.