• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Add a Sparkle to Your Fiat 500 Key Fob

These adorable Silicone Covers will add a touch of fun to your Fiat 500 Key fob. They are simple to install and snap into place of your original black cover.

The silicone covers protect the keys from splashes, dust and other contaminants. The silicone covers also make your keys appear more elegant. The signals produced by the remote control of your key are not blocked and work flawlessly even with the cover in place.

Guard your key from splashes, dust, and other contaminants

This silicone cover will give a classy look to your key. It is perfectly positioned around the key fob and isn't slipping. It also protects your key from splashes and dust. The signals emitted by your key remote control are not affected by the silicone cover, Fiat Ducato key Programming therefore you can use the buttons on your key fob just as normal.

Accessorize your fiat key duplication 500 in Grey or Black with these cool covers. They're perfect if the original key cover is beginning to look worn out, scratched or scratched. The covers are made from high quality silicone and come with two key rings so you can switch them out when you get bored of one color.

These covers are designed to replace the black stock key cover that came with your vehicle. They will not work when you have the original key cover.

Looks great

Fiat are a unique and well-known Italian brand and their cars are a striking style that sets them apart from the rest. These stylish car key covers are a simple and enjoyable way to add some sparkle to your keys without being too overpowering. They look amazing on your key fob and can be used to refresh a worn-out one.

The covers snap in the desired position and are designed to replace your original black cover. It is a good idea to remove the cover prior to installing the new.

The Fiat logo can be seen in both Grey and black. You can change it at any time! They are also great gifts for Fiat Ducato Key programming 500 owners.

Easy to install

Fiat 500 key covers can be a great method to update your keys. You can choose from a range of styles and colors to find the one that is most appropriate to your personal preferences. Install them yourself in ten minutes. You will require a screwdriver and some patience. The first step is to take off the original cover from your key. This needs to be removed before the new cover is installed.

Once you have removed the old cover Use a flathead screwdriver to pry out the four main attachment clips on the passenger side of the fob assembly. These are marked in red in the image below. Also note the tabs that locate slots, which are yellow, that must be removed as well.

After removing the battery, replace it with a brand new CR2032 3 volt coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening in the fob and that the"-" negative side is facing the rubber buttons.

Reattach the mirror's passenger side cover by aligning the tabs that locate it. Once you have completed this, put the fob for the driver side back in your vehicle and test it by pressing the push button on the front of the car key. If everything works correctly your car should start to turn on the parking lights and the doors will lock automatically.

Easy to remove

Fiat 500 Key Covers are a great way to freshen up your key fob. Easy to install, they have a distinctive look. They guard your key fob against scratches, smudges and dirt. In order to install a new cover, you'll first have to remove the previous one from your vehicle.

It is as easy as pressing the red "Fiat" button located on the front of your key fob. By pressing the button, you will release a lever that allows you to remove the switch for ignition on your key (1). When you remove the metal key, you will see the small silver-colored round switch with images of an unlocked and locked padlock next to it. This is the key fob battery switch. The battery is easy to replace by turning the switch a quarter turn with a small screwdriver that has a flathead.

The key fob is equipped with a microchip that communicates with the Body Control Module. When you insert your Fiat key, it presses a button inside the ignition switch. This is used to remind you of the "key-inignition". The BCM can scan the transponder on the key fob to confirm the validity of the key.

You can also get the sport design twin pack to give a unique, fun design to your key covers. These covers snap on over your existing cover and are available in Cream and silver. The key cover is only functional by removing the black cover from your key fob.